Tips To Upscale your Generator’s Power to Improve its Efficiency

A consultation session with a professional will help remove unexpected hazards from your generator. So be sure to go for it. You can do occasional servicing twice a week. That would be enough.
open type generator set

Table Of Content

A generator has become an essential part of the house due to its various uses. The way it caters to your needs when you run out of electricity is terrific. But you’d never want to spend your money all the time on maintenance resources when you can do it by yourself.

Follow a few simple steps can help you better your generator’s power to improve its efficiency. Because a regulated generator can go a long way for your electrical supports. But at first, we need to understand what dirty power is. And how it causes the loss of control in the generator:

What is dirty power?

Dirty power is the abnormality in the quality of the current the generator provides. This results in the ineffectual working of all other appliances. We can call it electrical pollution, in other words.

All electrical pieces of equipment work for a certain level of current and frequency. Due to improper input of wind, the devices get exposed to electrical hazards. Generators also get exposed to dirty power. But in the case of generators, the usual causes, along with others, are:

  • Low power factor
  • Voltage variations
  • Frequency variations
  • Surges

These issues combine to disrupt the flow of electricity. The high amount of dirty power can cause malfunction or breakdown of the generator. So it’s an issue that requires urgent attention.

How to overcome dirty power shortages?

You can apply various ways to clean up the dirty power of your generator. They are efficient and do-able ones. So follow the below-mentioned steps. And clean up the AC generator’s capacity to improve its efficiency:

1.Buy an inverter generator in the first place

You know that technology is advancing at the drop of a hat. So it would help if you benefited from the advancing inventions to help overcome minor issues. The same is the case with generators. Conventional generators are being replaced with Inverter generators.

Inverter generators are the advanced form of conventional generators. They produce electricity, but the power gets converted to direct current. The inverter does this with the help of rectifiers. It is further smoothened to suit the needs using high-quality capacitors.

Further, the inverter’s circuit converts that DC into alternating current for usual compatibility. This process might seem time-consuming. But thanks to the advanced circuitry, the generators produce a clean form of power.

2.Use a UPS (uninterruptible power system)

Don’t buy into the idea that you’re doomed for life if you have purchased a conventional generator. UPS attached to the traditional generator works the same as an inverter generator. The basic but efficient circuitry of UPS is connected to one or more batteries. The whole mechanism helps the UPS smoothen the generator’s wave of power. , the power supplied by the generator cleans off all dirty power factors.

Just be careful to use the UPS that is compatible and supports the output of the generator. This might need a little consultation with the concerned professional. But the US market is so diverse that you don’t need to worry about not finding the required UPS for your generator.

3. Attach an AVR (Automatic voltage regulator)

As the name suggests, an AVR regulates the voltage of the generator. It takes the fluctuating voltage and adjusts it to a constant voltage. An AVR helps generate cleaner and more consistent power than a standard generator. Be careful to pick an AVR whose wattage range is comparable to that of your generator.

4. Keep an eye on the condition to ensure the absence of dirty power.

To improve the condition of the generator is to have a complete know-how of your generator. See how it works and what its condition is. Does it need occasional maintenance, or you need a professional? Look for any loose wirings, disjointed chords or loose connections, or stuck buttons. After pointing out the issues, get rid of these petty things.

Although these might seem to be minor, they can cause a lot of loss to your generator. This can happen in the case of short circuits or burned-out wires. So be careful with that and get rid of all such stuff.

5. Inspect the fuel sections for cleaner power

A fuel strainer and a filter are the most essential parts of the fuel section. Inspect these parts and clean them of any dirt or fuel to keep them in good appearance. Due to the wrong fuel usage, sometimes the sediments settle down at the bottom of the fuel section. For this, shut off the fuel line valve and wipe the filter screen. The next step is to remove the sediments from the sediment reservoir.

Take extra care to follow these steps. As they are necessary to ensure proper and hazard-free refilling of your generator.

Leakage is another essential thing to consider for fuel sections. Do a regular informal inspection of your generator. This can ensure that no leakage is happening.

The last thing is to look for the spark plug. Use spark plug cleaners to swap the affected pins. You can buy spark plug cleaners from any home improvement shop.

6. Other small checkups to Improve power

a) Filter checkup: Check the filter often. Make sure to replace it after it seems wore-out.

b) Lubricant oil: Carefully read the manufacturer’s instructions about lubricant oil. Use good quality lubricant to ensure the better working of the generator. Apply a new lubricant when it seems that the old one is not performing perfectly.

c) Regular checkups: Even if you haven’t used the generator for a long time, do occasional checkups. It’s better not to leave the generator unused for a long time. If you don’t face power outages now, better start it often to ensure that it still works. Apply lubricant oil to prevent it from rust. Remove the dust so that it may not cause the engine to stick.

d) Proper place to store: Always ensure that the site you’re putting the generator is a proper one. A decent place should be free from moisture, water, dust, and other environmental hazards. Always prefer dry and cleaned areas to store the generator.

e) Occasional servicing: An occasional servicing ensures a more extraordinary life of the generator. So even if you don’t use it, give it periodic servicing. This includes proper cleaning, oil, and filter changing. Also, do other small checkups as mentioned.

A consultation session with a professional will help remove unexpected hazards from your generator. So be sure to go for it. You can do occasional servicing twice a week. That would be enough.

Conclusion

Dirty power is an aversion to the health of your generator. As seen, we can remove dirty power both by occasional cleaning and using different mechanisms. The bottom line is that you can apply various options to keep your generator off the dirty power. You need to choose and pick the ones that suit your needs. So don’t worry about the health of your generator’s power when you can amplify it with the mentioned tips and tricks.

Image for author

Hey all, I'm Baymax Yan, working at a generator manufacturer and Having more than 15 years of experience in this field, and I belives that “learn and lives.” The sure thing is that I can often help my work. So I have created the blog to share all my knowledge with you. Hope my sharing helps!

2 Responses

  1. Thanks for one’s marvelous posting! I seriously enjoyed reading it, you’re a great author.
    I will always bookmark your blog and will often come
    back in the foreseeable future. I want to encourage
    you to continue your great work, have a nice morning!

Leave a Reply

Your email address will not be published. Required fields are marked *

seventeen + 4 =